Let’s Make Marijuana Oil at Home

Welcome to Endoca’s beautiful organic
cannabis fields. Come I’ll show you
Well, in order to make a good cannabis extract
you need good starting plant material. In
my hand I have a cannabis plant it
smells fantastic. In order to make a nice
extract you need to obviously dry the
plant material first. Come let’s go to
the lab I’ll show you how to make an
extract. Welcome to Endoca. My name is
Henry Vincente and today I will show you
how to cannabis extraction using ethanol
We will use cannabis material which is
the leaves and the flowers all in one
Very important to use organic so that you
know there is nothing inside that can
harm you. There are over 4,000 different
varieties of cannabis now the one I
chose has a lot of CBD inside. You could
apply the same method or what kind of
cannabinoid eschews so called ethanol
take a ball put the plant material
inside so the process has to be very
fast. You don’t want the ethanol to touch
the plant material to a long time. If it
does you get a lot of other stuff inside
which you don’t want. You just use enough
ethanol to cover so that we can separate
the plant material from the cannabinoids. You need to be fast in this process
because we can only stir for three
minutes so I use a plastic spoon. You
don’t use mechanical devices because you
don’t want to create a spark. If I create
a spark now everything will burn. You mix
well then we have to separate the
ethanol from the plant material. I do
simply by taking a sieve and put it
in another Bowl. It can drip a little bit
you know there’s still some alcohol left
This was the first filtration now we’re
going to do the second filtration in
order to remove the plant material you
have left, and we do that by using a
simple coffee machine
It can heat your material and it can
filtrate and we start with the
filtration part coffee filter, take your spoon
you take now the material on the liquid
and you pour it into the filter paper
and you see the process starts. In order
to accelerate the process we change the
paper, every time a single filtration has
occurred if you have more material you
just continue until you don’t have any
more, and like this and it’s dripping
beautifully. Now it’s time to cook so
when you cook at home you can use many
different things I have here an example
of a rice cooker which works fine a pot
and a heating device works also fine and
a water distiller. Now my favorite is the
water distiller because if you cook with
any of these methods we need a cleanroom
box like this for those of you who
doesn’t have a box like this you can
cook outside but to make it all easier
let’s use the water distiller. Now this
is the process where we separate the
ethanol from the cannabinoids. The time
it will take for the full separation
depends of course of how much material
you put inside I use a bowl to collect
the pure ethanol that’s going to come
out here because you can you reuse it
again and again we give it some juice
and we wait so now the question is when
to stop I can see I have 80% of my
original ethanol volume so that’s
indication that it’s time to see what’s
going on inside you open the lid slowly
and look inside and you can see that is
very little material in my case this is
the time to stop just to be sure not to
breathe it here we go and be careful
when you pour because there’s very
little material you don’t want to lose
it and now I’m going to show you the
final step using the coffee machine what
we have to do is remove the remaining
ethanol from our extract put it on the
heating device turn it on and we wait
best is to wait for 24 hours so that
you’re sure that no ethanol is left I
already did this and as you can see from
all the work with it we have very little
material the final test is a quality
test we do it by using a paperclip
dipping it into the material and you use
a lighter you light it fast and see what
happens if there is a spark you know there is
still ethanol left so you can see
comparison see it’s burning then you
need to put it back on the heater but in
our case it was well done.
To make a
cannabis extract at home you need a
lighter
filter coffee machine some small bowls,
two bowls
sieve plastic spoon coffee filters
alcohol cannabis. Put the cannabis into
the bowl cover with cold alcohol steer
three minutes with plastic spoon filter
the alcohol through the sieve filter
again through the coffee filter it still
until 80 percent of the initial alcohol
volume is gone pour into a small ball
hit the small ball with the coffee
machine for 24 hours to remove the
remaining alcohol. To check if there is
any remaining alcohol use a small spoon
and the lighter if there is any
remaining alcohol the product will
produce sparks when burning with a
lighter keep heating until you don’t get
any sparks anymore
Enjoy your cannabis extract
Stay tuned
next time I’m going to show you how to
purify the extract and turn it into pure
cannabinoids in my hand is 99% CBD
beautiful crystals
See you next time

Next Post

The Surprising Benefits Of CBD Oil That One Needs To Know

Mon Oct 28 , 2019
Everywhere you turn, there is someone talking about CBD right now. The hard part is when you’re looking at the effects of CBD on the body, there’s only so much that can really be talked about. You see, there’s a lot of censorship because it’s so close to Cannabis, it’s […]
What is CBD? The Amazing Benefits of CBD Oil by Thomas DeLauer

We use cookies for providing best online experience. By agreeing you accept the use of cookies as detailed in our cookie policy.

Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

Google Analytics, Lucky Orange

We track anonymized user information to improve our website.
  • _ga
  • _gid
  • _gat

Decline all Services
Accept all Services